Baseline Systems FreeWave Ethernet Radio - Manual (Page 29)

User Manual and Reference Guide
LUM0024AB Rev A
4. Enter 0 to select the IP Setup Menu to display the IP Address along with the other IP setup
options:
The transceiver's current IP address displays in the IP Address option.
5. To change the IP address or any other setting available here, select the number of the selection
and make the changes. Each setting is described in detail in the next chapter.
Selecting option 1 from the main Setup menu displays the Security menu: From this menu, some
of the security options can be changed. Option 0 clears the MAC Filter list, setting the transceiver
back to allowing all Ethernet traffic.
6. Exit the Setup menu to reboot the transceiver.
13