B&G Network Quad - Manual (Page 8)

SETTING THE DISPLAY DAMPING
Damping allows the response time of the displayed speed
value to be slowed down if it is to jumpy in rough weather, or
to sped it up when the conditions are calm. The damping
works by averaging the values over a set time period; the
longer the time period the smoother the readings, however
the longer it takes to see a change. Similarly the shorter it is
the jumpier the readings, but the faster the response.
The Network QUAD unit has a factory set value of 5, this can
be adjusted in the range 1 to 64, each step is approximately
one second.
Press SPEED key
to display current
boat speed. Press SETUP key
once to display
the damping
value. Press ENTER key
if the value is to
be changed. Use S or T to
change the value.
Press ENTER key
to memorise the
change. Press SPEED key
to display current
boat speed.
610-HB-0503-05 8