B&G Network Quad - Manual (Page 21)

ENABLING/DISABLING THE SHALLOW ALARM
Press DEPTH key
to display the
shallow alarm. Press SETUP key,
the alarm state will
be displayed. Press ENTER key,
the alarm state
display will flash. Use S or T to
enable/disable the
alarm.
Press ENTER to
memorise the
change. Press DEPTH key,
the current value
is displayed.
ADJUSTING THE SHALLOW ALARM VALUE
Press DEPTH key
to display the
shallow alarm. Press SETUP key
twice, the value is
displayed. Press ENTER key,
the value display
will flash. Use S or T to
adjust the value.
Press ENTER key
to memorise the
new value. Press DEPTH key,
the value is
displayed and the
alarm enabled.
610-HB-0503-05 21