B&G Network Quad - Manual (Page 25)

ADJUSTING THE ANCHOR ALARM SHALLOW LIMIT
Press DEPTH key
to display
anchor alarm.
Press SETUP key
twice to display the
shallow value. Press ENTER key,
the value display
will flash. Use S or T to
change the value.
Press ENTER to
memorise the new
value and enable
the alarm. Press DEPTH key
to display the
anchor alarm.
ADJUSTING THE ANCHOR ALARM DEEP LIMIT
Press DEPTH key
to display
anchor alarm. Press SETUP key
3 times to display
the deep value. Press ENTER key,
the value display
will flash. Use S or T to
change the value.
Press ENTER to
memorise the new
value and enable
the alarm. Press DEPTH key
to display the
anchor alarm.
610-HB-0503-05
25