B&G Network Pilot - Manual (Page 45)

45
FAULT AND ERROR MESSAGES
NETWORK PILOT FAULT DISPLAY
If Network PILOT should have a fault the autopilot computer unit will
send a message to all other Network Display Units. The Network units
will alternately display the message above, the actual fault will have to
read from the Network PILOT Display unit.
UNIT INTERNAL ERRORS
In the unlikely event that your Network PILOT display unit should
develop an internal error, the unit will sound it's alarm continuously and
the display will show an error number. Pressing the keys will not silence
this alarm.
In some cases the fault can be cleared by switching off the instruments
at the supply, waiting a few moments and then switching on again. If
this does not clear the fault the error number should be recorded.
Switch off the supply and disconnect the faulty unit. Return it with the
error number to your dealer for servicing.