B&G Network Pilot - Manual (Page 10)

10
ENGAGING PILOT ON PREVIOUS COURSE
• Press the AUTO key twice within 4 seconds to engage
the autopilot on the previous MEMorised course.
NOTE
In this example the current course is 270
0 , the previous
autopilot course was 090 0 , displayed in the LCD text window.
The autopilot will steer the boat on to 090 0 as soon as the
AUTO key is pressed the second time.
CHANGING PILOT COURSE
• Press <10 or <1 to alter course to port in 10
0
or 1
0
increments.
• Press 10> or 1> to alter course to starboard in 10
0
or 1
0
increments.
• Multiple presses of the keys are added together to give
the required course change, e.g. for 20
0
to port press <10
twice, for 11 0 to starboard press 10> then 1>.
• The previous autopilot course is MEMorised and
displayed in the LCD text window.