Using the display key in comp mode – B&G Network Pilot User Manual
Page 13
13
USING THE DISPLAY KEY IN COMP MODE
Press the DISPLAY key to cycle through additional autopilot
and navigational information, displayed in the LCD text
window.
• RUD
Rudder Angle - Digits indicated rudder angle in
degrees to port <, or to starboard >.
• W A
Watch Alarm - Will indicate OFF or the time in
minutes and seconds until the alarm sounds.
• HDG
Heading - This is the actual compass heading in
degrees. The large digits indicate the autopilot
course.
PILOT IN STDBY
PILOT IN AUTO