B&G Network Compass - Manual (Page 16)

NETWORK COMPASS USER MANUAL
SETTING THE DISPLAY FOR TRUE OR MAGNETIC READINGS
1. Press SETUP until TRUE is flashing and either ON or OFF is displayed.
2. Press ENTER. ON or OFF will flash.
3. Press the or keys to switch the setting between ON and OFF
4. Press ENTER to accept the setting and return to setup mode.
5. Press MODE to return to the desired mode.
MODE TIMER LOCK SETUP LIGHTS
ENTER
Network COMPASS
TRUE
MODE TIMER LOCK SETUP LIGHTS
ENTER
Network COMPASS
TRUE
Compass will display TRUE headings Compass will display MAGNETIC headings
ENABLING THE HEAD/LIFT MODE
1.
Press SETUP until HEAD/LIFT is flashing and either ON or OFF is displayed.
2. Press ENTER. ON or OFF will flash.
3. Press the or keys to switch the setting between ON and OFF.
4. Press ENTER to accept the setting and return to setup mode.
5. Press MODE to return to the desired mode.
MODE TIMER LOCK SETUP LIGHTS
ENTER
Network COMPASS
LIFT HEAD
MODE TIMER LOCK SETUP LIGHTS
ENTER
Network COMPASS
LIFT HEAD
16