B&G Network Compass - Manual (Page 15)

NETWORK COMPASS USER MANUAL
SETTING THE COMPASS OFFSET
The compass offset compensates for fixed errors in the compass after installation and
calibration. For example, the sensor orientation may not be exactly correct.
1. Press SETUP until a bearing is displayed and the degrees sign is flashing.
2. Press ENTER. The numbers will flash.
3. Press the or keys until the desired value is shown (between +180° and -180°). A
positive offset has a bar graph on the right of the display, a negative offset has a bar
graph on the left of the display
4. Press ENTER to accept the value and return to setup mode.
5. Press MODE to return to the desired mode.
MODE TIMER LOCK SETUP LIGHTS
ENTER
Network COMPASS
MODE TIMER LOCK SETUP LIGHTS
ENTER
Network COMPASS
Compass Offset at -3 ° Compass Offset at +7 °
SETTING THE VARIATION
1. Press SETUP until Uxx is displayed (xx represents a number) and the U is flashing.
2. Press ENTER. The numbers will flash.
3. Press the or keys until the desired value is shown (between 90W and 90E). An
easterly variation has a bar graph on the right of the display, a westerly variation has a
bar graph on the left of the display.
4. Press ENTER to accept the value and return to setup mode.
5. Press MODE to return to the desired mode.
MODE TIMER LOCK SETUP LIGHTS
ENTER
Network COMPASS
MODE TIMER LOCK SETUP LIGHTS
ENTER
Network COMPASS
Variation is 5 °E Variation is 7 °W
15