B&G Network Autopilot - Manual (Page 34)

2 - 13
SPLITTING THE RAM DRIVE UNIT
IMPORTANT NOTE: When dealing with any hydraulic system great
care must be taken to ensure that a high degree of cleanliness is
observed and no dirt, moisture or foreign objects are allowed to enter
the system. When filling or topping up the external reservoir only use
a good quality ISO 10 hydraulic oil e.g., Q8 DYNOBEAR 10 (10cSt at
40
°
C)
It is not possible to split linear actuators.
Type 1 and type 2 units comprising separate ram/pumps, reservoirs
and hydraulic cylinders connected by hoses, are available from your
dealer. These are supplied with 1 metre hoses. Units with longer hoses
are also available. These can be supplied with quick connect couplings
and pre-filled hoses. Such units do not need to be bled.
Type 3 units are supplied as split units, connected by 1 metre hoses.
Units with longer hoses are available from your dealer. These can be
supplied with quick connect couplings and pre-filled hoses. Such units
do not need to be bled.