Aphex IN2 - Manual (Page 2)

Channels 2(R) IN2 Analog 2
Output
Device = IN2
Channels 1(L) IN2 Analog 1
Channels 2(R) IN2 Analog 2
Under File, select New-Multitrack Session
For Track 1, select Mono input as (01M) IN2 Analog 1
For Track 1, select output as Master.
Scroll down below the tracks and find the Master section.
Set output to Stereo-(01S) IN2 Analog 1.
On Track 1, click the (R) Record button, which will turn red.
On Track 1, click the (I) Input button, which will turn orange.
You should now see signal on the input meters and hear yourself in the IN2
headphones or speakers.
Apple GarageBand
Launch the application and select New Project.
Click on the microphone icon labeled Voice and click Choose.
Name the new project, assign a folder location and click Create.
Select GarageBand-Preferences.
Select the Audio/MIDI tab.
Set Audio Output to IN2. Click YES to “Change the audio driver?”
Set Audio Input to IN2. Click YES to “Change the audio driver?”
For GarageBand ’09 Set Optimize For “Minimum delay when playing instruments
live-Small buffer size.”
Exit Preferences.
At the bottom right of the GarageBand screen:
Set Input Source to Mono 1 (IN2)