Aphex IN2 - Manual

IN2 and Mac DAW Quickstart Guide
First make sure that your device is selected as the input and output device on
your Mac.
Go to Macintosh HD-Applications-Utilities-Audio MIDI Setup.
Note: You may want to drag this icon to your desktop toolbar so you always have
quick access to it.
When you open Audio MIDI Setup, the Audio Devices screen will appear. In the
column on the left you will see Aphex IN2.
Right click on Aphex IN2 and select Use this device for sound input.
Right click on Aphex IN2 again and select Use this device for sound output.
THESE INSTRUCTIONS ASSUME THE CONNECTION OF A MICROPHONE
TO ANALOG INPUT 1 OF THE IN2. IF YOU’RE USING A CONDENSER
MICROPHONE, BE SURE TO TURN ON THE 48V PHANTOM POWER
BUTTON ON THE IN2.
Adobe Audition
Under Audition-Preferences, select Audio Hardware.
Under Device Class select Core Audio for Mac or ASIO for Windows.
Set the Default Input and Output to your IN2.
Set Master Clock to your IN2.
Set Clock Source to Internal.
Set I/O buffer size to 64 samples. (If you hear pops and clicks in your audio,
come back and set the I/O buffer size to 128. Set this as low as possible without
hearing pops and clicks.)
Select a Sample Rate from 44.1kHz to 96kHz.
Under Audition Preferences, select Audio Channel Mapping.
Default Stereo Input
Device = IN2
Channels 1(L) (mono) IN2 Analog 1