Amico Nema 4 Master Alarm User Manual
Page 3

www.amico.com
3
Area Display Module
2 in 1 Display Module
Compact Display Module
Master/NEMA 4 Status Module
Computer Interface Module
Closing the Frame Module Assembly
Annunciator Module
14
Noise Level Control
Control of Remote Alarm Buzzer
Steps to Re-Calibrate the Sensor from Area Module v4.0
15
Area, 2 in 1, Compact Display Module
15 - 19
PSI/kPa/ BAR selection
Inch Hg/kPa/BAR selections
Common Settings for Pressure and Vacuum
Setting Factory Default
Setting Gas Identification Switches
Chart of Gas Specific Settings of Dip-Switches
Master/NEMA 4 Status Module
19 - 21
Repeat Alarm
Signal Input Selection
Maintenance Mode
Troubleshooting Guide
22 - 24
Error Code Messages on the Display Module
24
Model Numbers
25 - 28
Area Alarm
Master Alarm
Compact Alarm
NEMA 4 Alarm
Compact Master Combination Alarm
2 in 1 Area Alarm
Spare Part Numbers
29 - 31