Great Plains 4000TM Predelivery Manual - Manual (Page 8)

586-537Q 03/19/2014
4 3500-4000TM Great Plains Manufacturing, Inc.
Introduction
The Turbo Max has been designed with care and built by
skilled workers using quality materials. Proper setup,
maintenance, and safe operating practices will help the
customer get years of satisfactory use from the machine.
Description of Unit
The 3500-4000TM Turbo Max is a three or five section
“vertical” tillage tool. Working width ranges from 35 to 40
feet. The implement is designed to cut and size residue,
till soil for faster seedbed warming, break up soil crust on
hard dried fields while eliminating compaction layers. The
front and rear gangs may be adjusted from 0-6 degree
angle, depending on the aggressiveness desired. Various
finishing attachments are also available to further smooth,
redistribute residue, kill weeds, and break clods
Models Covered
Document Family
Tools Required
• Basic Hand Tools
• Torque Wrench
• Fork Truck, Overhead Hoist or Loader
Pre-assembly Checklist
❑ Before assembling, read and understand “Important
Safety Information” in front part of this manual.
❑ Have at least two people on hand while assembling.
❑ Make sure area is level and free of obstructions (pref-
erably an open concrete area).
❑ Have all major components
❑ Have all fasteners and pins shipped with machine.
3500TM 35’ (7.5in) spacing
4000TM 40’ (7.5in) spacing
586-537Q-ENG Assembly Manual
586-537Q Pre-Delivery Manual (this document)
586-537M Operator Manual
586-537P Parts Manual
Figure 1
3500 Turbo Max
43102