Great Plains 4000TM Predelivery Manual - Manual (Page 32)

28 3500-4000TM Great Plains Manufacturing, Inc.
586-537Q 03/19/2014
Install Decals
Refer to Figure 25
Note: The center brace bar decals will need installed in loca-
tions shown. Clean the area on which the decal is to be
placed. Peel backing from decal. Press firmly on sur-
face, being careful not to cause air bubbles under decal.
93. Install two, 838-615C amber decals (one each side).
94. Install one 838-611C hand crushing decal on front of
brace bar (right side).
Refer to Figure 26
95. Install one, 848-972C (Model 3500) or 858-002C (Model
4000) bypass valve operating instruction decal on front
of truss (left side) .
96. Install one, 848-844C fold valve decal , on top of left,
front truss , arrow facing towards two way fold valve ,
on bypass valve .
Figure 25
Decals
42421
2
1
1
2
Figure 26
Hydraulic Decals
43117
4
3
5
7
6
3
5
4
5 6
7