Great Plains 3S-3000HDF Operator Manual v2 - Manual (Page 95)

2014-02-11 Table of Contents Index 195-068M
Great Plains Manufacturing, Inc. Table of Contents Index 91
Options
Hitches
One hitch is selected upon initial order of an 3S-3000HD
Drill, and includes the spring wire loop, safety chain, and
all fasteners. Additional hitches may be ordered for
conversion in the field, and include extra hitch mounting
bolts, lock washers and nuts.
FigureSpacer
Open Center Conversion
The standard 3S-3000HD drill is compatible with tractors
having “active” or “closed center” hydraulic systems. For
use with “non-active” or “closed center” tractors, a
conversion kit is available. Order one kit per drill.
For operations, see “Tractors with Open Center
Hydraulics” on page 20.
FigureSpacer
Two Outlet Hydraulic Kit
The standard 3S-3000HD drill requires three remote
outlet circuits on the tractor. If only two are available, this
kit enables the Transport and Opener Lift circuits to
share a single remote, via a selector valve on the tongue
at the hitch. Order one kit per drill.
For operations, see “Lift Selector Valve Operation” on
page 43.
FigureSpacer
Hitch Description Part Numbers
Large Strap 170-038A
Clevis 170-039A
Small Strap 170-059A
27006
1
2
3
1
2
3
Description Part Number
Open Center Hydraulic Kit 194-143A
BASE END
, CENTER OPENERS
ROD END
, CENTER OPENERS
BASE END
, WING OPENERS
ROD END
WING OPENERS
1200 600
0 3000
1800
240 0
psi
1200 600
0 3000
1800
2400
psi
P
G
R
T
P
G
R
T
3
1
2
LOWER
TO TRACTOR
RAISE
1
2
3
1
2
3
FILTER
FigureSpacer
18750
Description Part Number
Two Outlet Tractor Conversion 194-122A
FigureSpacer
15550