Great Plains 3S-3000HDF Operator Manual v2 - Manual (Page 21)

Great Plains Manufacturing, Inc. Table of Contents Index Preparation and Setup 17
2014-02-11 Table of Contents Index 195-068M
Electrical Connections
Refer to Figure 7
Plug drill electrical lead into tractor seven-pin connector.
If your tractor is not equipped with a seven-pin connector,
contact your dealer for installation.
FigureSpacer
Refer to Figure 8
If the drill is equipped with the optional shaft monitor,
mate the connector for the cab display.
See “Shaft Monitor” on page 93 for ordering
information.
FigureSpacer
Refer to Figure 9
If the drill is equipped with the point row option, mate the
connector for the cab control.
See “Point Row Clutch” on page 92 for ordering
information.
FigureSpacer
Figure 7
Lighting Connector
26467
FigureSpacer
Figure 8
Shaft Monitor Connector
34222
FigureSpacer
Figure 9
Point-Row Connector
26469