Great Plains NP4000B Operator Manual - Manual (Page 156)

152 2013+ NP4000/A/B Table of Contents Index Great Plains Manufacturing, Inc.
417-199M Table of Contents Index 2014-05-14
Side Dress Extensions
These accessory kits provide a left wing extension to
support an additional (17th) forward single coulter and
forward delivery tube or boom drop line. The kit is
user-installed, and conversion between pre-emergence
and side dress modes requires user re-configuration of
the applicator.
Note: Side Dress is presently recommended only for
30 inch (76.2 cm) row spacings. Hitch re-centering
has stops only for 30 inch.
407-940A and 407-941A Notes:
These coulters do not include row cleaners. If row
cleaners are desired order one 207-254S. Be sure to
review the NOTICE on page 180.
These kits include a boom nozzle for the 17th boom
outlet, and one set of orifice plates (sizes 28, 34 and 48).
If a different size is required, order one or more plates.
See page 150.
407-907A Note:
Order the without-coulter part number for use on
triple-coulter applicators that have both rear coulters and
tine attachments on the rear coulters. All of the rear
coulters are removed during conversion to side dress;
one coulter, its nozzle and drop line, and its grease bank
tubing, is relocated to the wing extension.
417-124A Note:
This kit includes one anhydrous coulter, all hardware and
tubing necessary to connect it to a spare port on the
section flow divider.
See “Side Dress Installation” on page 180 for
installation and use instructions.
Accessory Package
Part
Number
NP4000 SIDEDRESS OPT. FLUTED 407-940A
NP4000 SIDEDRESS OPT. TURBO 407-941A
DOUBLE TERRA TINE 207-254S
NP4000 SIDEDRESS OPTION 407-907A
SIDEDRESS OPTION NH3 COULTER 417-124A
34942
417-124A
34942
407-941A