Great Plains NP4000B Operator Manual - Manual (Page 13)

Great Plains Manufacturing, Inc. Table of Contents Index Important Safety Information 9
2014-05-14 Table of Contents Index 417-199M
Safety Decals
Safety Reflectors and Decals
Your applicator comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your applicator.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request
corresponding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
818-055C
Slow Moving Vehicle Reflector
On a mount attached to the transport rest assembly;
1 total
See “Transport” on page 59.
32339
838-266C
Red Reflectors
On the rear face light bracket, and
back face, outside ends of the top transport rest tube;
4 total
See “Transport” on page 59.
32339
838-265C
Amber Reflectors
On outside faces of caster weldments, and on front faces
of outside tank cradles (on tankless models, the forward
reflectors are on the side faces of the front subframe);
4 totalSee “Transport” on page 59.
32339