Great Plains TC5319 (S/N A1420X+) Predelivery Manual - Manual (Page 8)

566-224Q 03/06/2014
4 TC5109-5323 Great Plains Manufacturing, Inc.
Introduction
The Turbo-Chisel has been designed with care and built
by skilled workers using quality materials. Proper setup,
maintenance, and safe operating practices will help the
customer get years of satisfactory use from the machine.
Description of Unit
The TC5109-5323 Turbo-Chisel is a one or three-section
“vertical” tillage tool. Working width ranges from 11 to 29
feet. The implement is designed to cut, size and bury res-
idue. It can work up to 11” deep, will dislodge rootballs
and leave the field smooth enough for “one pass” finish-
ing in Spring. For optimum leveling of your machine, it
should be equipped with either a Chopper Reel or Buster
Bar attachment.
Models Covered
Document Family
Tools Required
• Basic Hand Tools
• Torque Wrench
• Fork Truck, Overhead Hoist or Loader
Pre-assembly Checklist
1. Before assembling, read and understand “Important
Safety Information” in front part of this manual.
2. Have at least two people on hand while assembling.
3. Make sure area is level and free of obstructions
(preferably an open concrete area).
4. Have all major components
5. Have all fasteners and pins shipped with machine.
TC5109 11-Foot 1-section
TC5111 14-Foot 1-section
TC5113 16-Foot 1-section
TC5115 19-Foot 1-section
TC5313 16-Foot 3-section
TC5315 19-Foot 3-section
TC5317 21-Foot 3-section
TC5319 24-Foot 3-section
TC5321 26-Foot 3-section
TC5323 29-Foot 3-section
566-224Q-ENG Assembly Manual
566-224Q Pre-Delivery Manual (this document)
566-224M Operator Manual
566-224P Parts Manual
Figure 1
Turbo-Chisel
41977