Shipping – Great Plains TC5319 (S/N A1420X+) Predelivery Manual User Manual
Page 10
6
TC5109-5323
Great Plains Manufacturing, Inc.
566-224Q
03/06/2014
Shipping
The Turbo-Chisel will be shipped pre-assembled as
shown.
Refer to Figure 3
• The Turbo-Chisel will be shipped with shipping
stands that will not need to be returned to Great
Plains.
• Wings will be connected to center frame and folded
in transport positions.
• Gangs will be pre-assembled and banded together
on pallets.
• Shank mount assemblies will be attached to frames
in proper locations.
• Pre-assembled light brackets will be banded to cen-
ter frame.
Refer to Figure 4
• Shank assemblies will be shipped in a box on a pal-
let.
• Finishing attachments (if equipped), will be pre-
assembled and banded to pallet.
Figure 3
Shipping Stands
41336
Figure 4
Finishing Attachments
41337
This manual is related to the following products:
- TC5323 (S/N A1420X+) Predelivery Manual TC5321 (S/N A1420X+) Predelivery Manual TC5317 (S/N A1420X+) Predelivery Manual TC5315 (S/N A1420X+) Predelivery Manual TC5313 (S/N A1420X+) Predelivery Manual TC5115 (S/N A1420X+) Predelivery Manual TC5113 (S/N A1420X+) Predelivery Manual TC5111 (S/N A1420X+) Predelivery Manual TC5109 (S/N A1420X+) Predelivery Manual