Great Plains 3PYPA Planters - Manual (Page 12)

12 Great Plains Manufacturing, Inc. Front Page Part Lists Tractor Sensor Module Installation
401-768M Front Page Part Lists 06/16/2011
John Deere Wheeled Tractors (cont’d)
Refer to Figure 23
The Steering Sensor Module with module master input
harness (gray end plug) connected.
Optional adaptor harness for John Deere wheeled
tractors
is necessary when the tractor wheel angle
signal cannot be obtained from the CANbus on the trac-
tor.
833-548C HARNESS JD WHEEL ANGLE SENSOR
WHEEL TYPE
Refer to Figure 24 and Figure 25
3.
NON ISObus COMPATIBLE
The tractor Wheel Angle Sensor harness plug
can
be found on the left side of the tractor just below the
air cleaner canister.
• Disconnect the wheel angle sensor harness .
• Plug adaptor harness for JD wheeled tractors
833-548C where wheel sensor was discon-
nected.
• Reconnect wheel sensor to free end of adaptor
harness.
• Run and secure the Wheel Angle Sensor wire
from the Module Master Harness out of the cab to
the SIGNAL OUTPUT wire on the adaptor har-
ness.
Null4:
Figure 23
John Deere Wheeled Tractors
Adaptor Harness
31850
18
1
1
18
18
Null4:
Figure 24
John Deere Wheeled Tractor
31948
2
2
2
18
Null4:
Figure 25
John Deere Wheeled Tractor
31949
2