Definitions, Owner assistance, Product support – Great Plains 1300 13-Foot Operator Manual User Manual
Page 16
12
1300 and 1300F
Great Plains Manufacturing, Inc.
175-157M
2014-04-15
Definitions
The following terms are used throughout this manual.
Right-hand and left-hand as used in this manual are
determined by facing the direction the machine will travel
while in use unless otherwise stated.
Economic or Liability Risk:
Paragraphs in this format present a crucial point of information
related to the current topic.
Read and follow the directions to:
• remain safe,
• avoid serious damage to equipment and
• ensure desired field results.
Note: Paragraphs in this format provide useful
information related to the current topic.
Owner Assistance
If you need customer service or repair parts, contact a
Great Plains dealer. They have trained personnel, repair
parts and equipment specially designed for Great Plains
products.
Refer to Figure 3
Your machine’s parts were specially designed and
should only be replaced with Great Plains parts. Always
use the serial and model number when ordering parts
from your Great Plains dealer. The serial number plate is
located on the left side of the drill frame below the front
of the seed box.
Record your drill model and serial number here for quick
reference:
Model Number:__________________________
Serial Number: __________________________
Your Great Plains dealer wants you to be satisfied with
your new machine. If you do not understand any part of
this manual or are not satisfied with the service received,
please take the following actions.
1.
Discuss the matter with your dealership service
manager. Make sure they are aware of any problems
so they can assist you.
2.
If you are still unsatisfied, seek out the owner or
general manager of the dealership.
For further assistance write to:
Product Support
Great Plains Mfg. Inc., Service Department
PO Box 5060
Salina, KS 67402
-
5060
785-823-3276
L
R
Figure 2
Left/Right Notation
20148
Figure 3
Serial Number
16643