Great Plains 1300 13-Foot Operator Manual - Manual (Page 10)

6 1300 and 1300F Table of Contents Index Great Plains Manufacturing, Inc.
175-157M Table of Contents Index 2014-04-15
Safety Decals
Safety Reflectors and Decals
Your drill comes equipped with all lights, safety reflectors
and decals in place. They were designed to help you
safely operate your drill.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request
corresponding safety decals.
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
818-003C
Slow Moving Vehicle Reflector
Center of walkboard;
1 total
838-266C
Red Reflectors
On rear walkboard face, outside corners;
2 total
16613
20148