Lights & smv 1200-1500, Lights & smv 1800-3000, Front lights & smv 3500-4000 – Great Plains 4000TM Predelivery Manual User Manual
Page 33
Great Plains Manufacturing, Inc.
Assembly
29
11/06/2012
586-288Q
Lights & SMV 1200-1500
Note: See layout drawings in Appendix for proper light bracket
placement. The SMV sign will be shipped in a bag and
will need installed on the rear of the machine.
107.Remove u-bolts from light brackets and rotate 180
degrees. Re-install the LH
and RH
light brackets with
the 1/2 x 3 1/32 x 6 u-bolts
, 1/2 lock washers and 1/2
nuts.
108.Attach the SMV sign
to the rear of the smv bracket
with 1/4 x 3/4 pan head screws
, 1/4 lock washers and
1/4 nuts.
109. Tighten all bolts to specs, See “Torque Values Chart” on
Lights & SMV 1800-3000
Refer to Figure 31
Note: The light bracket assemblies and SMV sign will be
shipped in a bag and will need installed on the machine.
110.Install the LH
and RH
light brackets with the 1/2 x 1
1/2 hex bolts
, 1/2 lock washers and 1/2 nuts.
111.Attach the SMV sign
to the rear of the smv bracket
with 1/4 x 3/4 pan head screws
, 1/4 lock washers and
1/4 nuts.
112. Tighten all bolts to specs, See “Torque Values Chart” on
Front Lights & SMV 3500-4000
Note: See layout drawings in Appendix for proper light bracket
placement. If machine is equipped with a rear attach-
ment the rear light brackets will need to be mounted to
the rear tube of the center drag frame. The SMV sign will
be shipped in a bag and will need installed on the rear of
the machine.
113.Remove u-bolts from light brackets. Install the RF/LR
and LF/RR
light brackets with the 1/2 x 3 1/32 x 6 u-
bolts
, 1/2 lock washers and 1/2 nuts.
114.Attach the SMV sign
to the rear of the smv bracket
with 1/4 x 3/4 pan head screws
, 1/4 lock washers and
1/4 nuts.
115. Tighten all bolts to specs, See “Torque Values Chart” on
2
1
3
4
6
5
Figure 30
Lights & SMV 1200-1500
42887
1
2
3
4
5
6
Figure 31
Lights & SMV 1800-3000
42886
2
1
3
4
6
5
1
2
3
4
5
6
Figure 32
Front Lights & SMV 3500-4000
42888
4
6
5
1
3
2
1
2
3
4
5
6