Great Plains 4000TM Predelivery Manual - Manual (Page 12)

586-288Q Table of Contents Index 11/06/2012
8 1200-4000TM Table of Contents Index Great Plains Manufacturing, Inc.
Assembly
Center Brace Bar 1800-3000
Refer to Figure 6
Note: The center brace bar, front trusses, level bar and hitch
may need to be installed on truck so machine may be
pulled off side of truck. The bolt kit needed for assem-
bling the rest of machine will be shipped in a bag tied
to front of center frame. The center will be shipped par-
tially pre-assembled. See “Parts Manual” for part num-
bers and description of parts.
17. Align holes in plates of the center brace bar with
holes on front of center frame , secure with 3/4 x 2
hex bolts , 3/4 lock washers and 3/4 nuts.
18. Bolts may be tightened to specs, See “Torque Values
Chart” on page 36.
Center Brace Bar 3500-4000
Refer to Figure 7
Note: The center brace bar, front trusses, level bar and hitch
may need to be installed on truck so machine may be
pulled off side of truck. The bolt kit needed for assem-
bling the rest of machine will be shipped in a bag tied
to front of center frame. The center will be shipped par-
tially pre-assembled. See “Parts Manual” for part num-
bers and description of parts.
19. Align holes in plates of the center brace bar with
holes on front of center frame , secure with 3/4 x 2
hex bolts , 3/4 lock washers and 3/4 nuts.
20. Both outside plates (bottom holes only, 4 total) will
require 3/4 x 7 hex bolts , 3/4 lock washers and 3/4
nuts.
21. Bolts may be tightened to specs, See “Torque Values
Chart” on page 36.
Figure 6
Center Brace Bar 1800-3000
42370
2
3
1
U
D
F
B
L
R
1
2
3
Figure 7
Center Brace Bar 3500-4000
42866
2
4
3
U
D
F
B
L
R
3
4
3
1
1
2
3
4