Great Plains 2515P Marker Option - Manual (Page 6)

113-685M 3/19/2003
Great Plains Mfg., Inc.
Marker Option 6
Installing Marker Hydraulics
Without Sequence Valve
Refer to Figure 8.
1. Install elbow fittings (1) in cylinder ports.
2. At rod end of each cylinder, install an adaptor
(2) into elbow fitting. Install a needle valve (3)
in adaptor.
3. Connect hydraulic hoses to fittings and route
hydraulic hoses to tractor outlets. Route hy-
draulic hoses through transport-carrier mount
at cutout. Use black cable ties to secure hy-
draulic hoses to bean machine frame.
4. Using orange cable ties, secure a plastic hose
holder to each pair of hydraulic hoses near
tractor outlets. See Figure 9.
5. Proceed with "Bleeding Marker Hydraulics,"
page 8.
Figure 8
Needle Valve Assembly
17642
Figure 9
Hose Label and Cable Tie
17641
Plastic
hose label
Cable tie