Great Plains CTA4000 Operator Manual - Manual (Page 57)

Options 53
08/03/2010 160-269M-A
Options
Blockage Detector
The seed monitor supports sensors that monitor for plug-
ging in the one-inch, secondary hoses. The package
includes programmable blockage modules for each tower
and flow sensors for each secondary seed hose. The
blockage modules signal the monitor when flow stops at
a sensor. The monitor then sounds an alarm and identi-
fies the problem hose.
To order blockage sensors, contact your Great Plains
dealer.
Hydraulic Bypass Kit
To operate the CTA4000, some tractors with load-sens-
ing closed-center, or constant-flow hydraulics need a
bypass valve.
Consult your tractor dealer for advice about your specific
tractor model.
See “Bleeding Hydraulics” on page 15 for operating
instructions.
Markers
Markers for this implement model are not provide by
Great Plains, but are available from at least one third-
party supplier. Consult your Great Plains dealer for a cur-
rent recommendation of brand and model.
Press Wheels
A variety of single and dual press wheels are available,
as bundle options at the time of initial implement order.
Kits are not presently available to convert these in the
field. Parts may be ordered to do so.
Implement, Row Spacing Part Numbers
CTA4000-8006, 6 in (15.2 cm) 168-408A
CTA4000-6575, 7.5 in (18.8 cm) 168-409A
CTA4000-5010, 10 in (24.8 cm) 168-410A
16457
Description Part Number
Tractor Hydraulic Bypass Kit 810-400C
17987