Great Plains 9756PP Predelivery Manual - Manual (Page 9)

Great Plains Manufacturing, Inc. Introduction 5
02/17/2014 580-043Q
Using This Manual
This manual was written to help you assemble and pre-
pare the new machine for the customer. The manual
includes instructions for assembly and setup. Read this
manual and follow the recommendations for safe, efficient
and proper assembly and setup.
An operator’s and parts manual is also provided with the
new machine. Read and understand “Important Safety
Information” and “Operating Instructions” in the opera-
tor’s manual before assembling the machine. Refer to the
parts manual for proper part’s identification. As a refer-
ence, keep the operator’s and part’s manual on hand while
assembling.
The information in this manual is current at printing. Some
parts may change to assure top performance.
Definitions
The following terms are used throughout this manual.
A crucial point of information related to the preceding topic. Read
and follow the directions to remain safe, avoid serious damage to
equipment and ensure desired field results.
Note: Useful information related to the preceding topic.
Right-hand and left-hand as used in
this manual are determined by facing
the direction the machine will travel
while in use unless otherwise stated.
An orientation rose in some line art
illustrations shows the directions of: Up,
Back, Left, Down, Front, Right.
Figure 2
Right / Left
43006
R
L
U
D
F
B
L
R