Great Plains 9756PP Predelivery Manual - Manual (Page 8)

580-043Q 02/17/2014
4 9322-9756PP Great Plains Manufacturing, Inc.
Introduction
The Plains Plow has been designed with care and built by
skilled workers using quality materials. Proper setup,
maintenance, and safe operating practices will help the
customer get years of satisfactory use from the machine.
Description of Unit
The Plains Plow is a three, five or seven-section V-Blade
undercutting tillage tool. Working width ranges from 22 to
56 feet. The implement is designed to undercut, kill
weeds, apply fertilizers, break up hardpan, manage resi-
due for greater moisture retention and wind erosion pro-
tection.
Models Covered
Document Family
Tools Required
• Basic Hand Tools
• Torque Wrench
• Fork Truck, Overhead Hoist or Loader
Pre-assembly Checklist
1. Before assembling, read and understand “Important
Safety Information” in front part of this manual.
2. Have at least two people on hand while assembling.
3. Make sure area is level and free of obstructions (pref-
erably an open concrete area).
4. Have all major componets
5. Have all fasteners and pins shipped with machine.
9322PP 22-Foot 3-section
9326PP 26-Foot 3-section
9533PP 33-Foot 5-section
9540PP 40-Foot 5-section
9744PP 44-Foot 7-section
9748PP 48-Foot 7-section
9752PP 52-Foot 7-section
9756PP 56-Foot 7-section
580-043Q Pre-Delivery Manual (this document)
580-043M Operator Manual
580-043P Parts Manual
Figure 1
9744PP Plains Plow
43006