Opener depth – Great Plains 3S-5000HDF Operator Manual User Manual
Page 35

Great Plains Manufacturing, Inc.
Operating Instructions
31
2012-08-14
195-325M
Opener Depth
After opener pressure is set on an active or non-active
hydraulic system, set opener seeding depth by adjusting
press wheel height.
To adjust, raise openers slightly.
2.
Lift and slide T-handles on top of openers.
3.
Adjust all press wheels to the same height.
• For shallower seeding, slide T-handles
toward drill.
• For deeper seeding, slide T-handles
away from drill.
Figure 23
Press Wheel Adjustment
15659
This manual is related to the following products: