Great Plains 3S-5000HDF Operator Manual - Manual (Page 10)

6 3S-5000/F/HD/HDF Table of Contents Index Great Plains Manufacturing, Inc.
195-325M Table of Contents Index 2012-08-14
Safety Decals
Safety Reflectors and Decals
Your implement comes equipped with all lights, safety
reflectors and decals in place. They were designed to
help you safely operate your implement.
▲ Read and follow decal directions.
▲ Keep lights in operating condition.
▲ Keep all safety decals clean and legible.
▲ Replace all damaged or missing decals. Order new decals
from your Great Plains dealer. Refer to this section for
proper decal placement.
▲ When ordering new parts or components, also request
corresponding safety decals.
Transport Decals
818-055C
Slow Moving Vehicle Reflector
On center section;
one total
838-266C
Red Reflectors
On rear of center section, one each outside corner;
two total
To install new decals:
1. Clean the area on which the decal is to be placed.
2. Peel backing from decal. Press firmly on surface,
being careful not to cause air bubbles under decal.
34283
34284