Wheatheart Transfer Auger - Manual (Page 41)

W HEATHEART M ANUFACTURING - T RANSFER A UGER 7. S TORAGE
8”, 10”, & 13”
IM2 R2 41
7. Storage
To ensure a long, trouble-free life, the following procedure should be followed
when preparing the unit for storage after the season’s use:
• Lock out all power.
• Store the machine on a level surface, free of debris, and in an area away
from human activity. Store in a dry place, or use a tightly secured tarp to
protect the equipment from the weather.
• Remove all residual material and clean the machine thoroughly.
• Inspect the unit at stress points for cracks.
• Repair or replace any worn or damaged components to prevent any
unnecessary downtime at the start of the next season.
• Touch up paint nicks and scratches to prevent rusting.
• Check hydraulic fittings, hoses, lines, couplers, and valves. Tighten any
loose fittings. Replace any hose that is badly cut, nicked, abraded, or is
separating from the crimped end of the fitting. Secure the hoses to the
machine.
• Inspect and tighten all fasteners; replace fasteners if required.
• Inspect the engine for any abnormal leaks, check the air filter and clean or
replace as necessary. Drain the gas from the carburetor and gas tank.
Check to see if there is sufficient oil in the crankcase.
• Support intake on blocks to eliminate prolonged contact with the ground.
• Lubricate all grease fittings.
• Cover motor/engine to protect from weather.
• Chock wheels.
• Check tire pressure.
Warning: Before continuing, ensure you have read and understand the relevant information
in the safety section. Safety information is provided to help prevent serious injury, death, or
property damage.