Dymo Disc Painter - Manual (Page 27)

Printing to the DiscPainter Printer
23
General Printing Instructions
Discus for DYMO automatically sets the printer options based on the settings you select on the
Project Preview tab. However, if you are printing from another application, you may need to
manually control the printer settings. When you are ready to print an image, follow the steps in this
section.
To print to a DiscPainter printer
1 Insert a blank disc into the printer (see "Loading Discs" on page 6 for information).
2 Select Print. This command is typically accessed from the application’s File menu. A dialog
box is displayed.
3 Select the DiscPainter printer. (If you don’t see a list or menu used to select printers, see the
documentation included with the program for instructions on selecting printers.)
4 Click Properties (or Setup). The DiscPainter Document Properties dialog box is displayed.
5 Click the Size/Quality tab. The Size/Quality pane is displayed.
6 If necessary, adjust any printer settings you want. See "Controlling Print Options" on page 18
for details.
7 When finished, click OK.
8 Click Print.
During printing, the Printing Status dialog box is displayed. This dialog box displays the progress
of the current print job (percentage completed, from 0% to 100%), the copy currently being printed,
and the total number of copies (“Printing copy 1 of 2,” for example).
To cancel the current print job
1 Click Cancel in the Printing Status dialog box. A confirmation dialog box is displayed.
2 Click Yes to cancel the print job. Printing stops at the point the printer receives the cancel
printing instruction. The disc tray moves back to the home position.