Dymo LabelManager Wireless PnP User Guide - Manual (Page 6)

6 LabelManager ® Wireless PnP
User Guide
Power
The button turns the label maker power on and off.
Power Status Light
The power LED visually shows the power status of the label maker.
When the label maker is turned on but not connected to a power source, the
status light remains on but is dimmed.
Wireless Status Light
The wireless LED visually shows the network status of the label maker.
Reset
The Reset button resets the printer to the factory default settings. Resetting the
printer results in the loss of all current settings, including wireless settings. Press
this button only if you want to erase all current information on the label maker. To
press the Reset button, use a thin object such as the tip of a pen or pencil.
Status Light Power Status
Off The label maker is off; the battery pack may still be charging
if plugged into a wall outlet
Slow Blinking The label maker is on and the battery pack is charging
Fast Blinking The label maker is on and there is an error
Solid The label maker is on and the battery pack is not charging
Status Light Label Maker Status
Off The label maker is not connected to a wireless network
Slow Blinking The label maker is connecting to a wireless network
Fast Blinking The label maker is registering with a wireless network
Solid The label maker is connected to a wireless network