Dymo LabelManager 210D - Manual (Page 5)

5
About Your New Label Maker
With the DYMO LabelManager 10D electronic label maker, you can create a wide variety of
high-quality, self-adhesive labels. You can choose to print your labels in many different font
sizes and styles. The label maker uses DYMO D1 tape cassettes in widths of 6 mm, 9 mm, or
1 mm. These tape cassettes are available in a wide range of colors.
Visit www.dymo.com for information on obtaining labels and accessories for your label
maker.
Product Registration
Visit www.dymo.com/registration to register your label maker online.
Getting Started
Follow the instructions in this section to print your first label.
Connecting the Power
The label maker is powered by standard batteries or an AC power adapter. To save power,
the label maker automatically turns off after two minutes of inactivity.
Inserting the Batteries
The label maker uses six high-capacity AA alkaline
batteries.
To insert the batteries
Slide the battery compartment cover away from
the label maker. See Figure .
Insert the batteries following the polarity
markings (+ and –).
Replace the cover.
Ç Remove the batteries if the label maker will not be used for a
long period of time.
1.
.
. Figure 2
LM210D_manual_UK-WEU.indd 5 28-06-2007 10:03:34