Dymo LabelManager 210D - Manual (Page 17)

17
Caring for Your Label Maker
Your label maker is designed to give you long and
trouble-free service, while requiring very little
maintenance. Clean your label maker from time to time
to keep it working properly. Clean the cutter blade each
time you replace the tape cassette.
To clean the cutter blade
Remove the tape cassette.
Press and hold down the cutter button to expose the cutter
blade. See Figure 6.
Use a cotton ball and alcohol to clean both sides of the blade.
To clean the print head
Remove the tape cassette.
Remove the cleaning tool from inside the label compartment cover.
Gently wipe the padded side of the tool across the print head. See Figure 6.
1.
.
.
1.
.
.
Figure 6
Print head Cutter
button
LM210D_manual_UK-WEU.indd 17 28-06-2007 10:03:47