ClearOne AP IR Remote - Manual (Page 8)

Specifications
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
Remote Control System
Range
25–40' (7.5–12 m)
from transmitter to receiver
Angle of acceptance
90°–120°
Operating temperature
0–50° C (32–122°F)
Compliance approvals
FCC, Industry Canada, and
CE
Remote Transmitter
Dimensions (LxWxH)
8" x 2.125" x 1.19"
20.3 cm x 5.4 cm x 3 cm
Battery type
2 AAA
Battery life
Approximately 1 year
Remote Receiver
Dimensions (LxWxH)
5" x 2.75" x 1"
(12.7 cm x 7 cm x 2.54 cm)
Power
Powered by the AP system
Cable length
6' (1.8 m)
13 Using the AP IR Remote 12
Technical Services Group ~ 1-800-283-5936 (USA) ~ 1-801-974-3760
To Access Features From a PBX
• Press the Flash button.
Please consult your PBX owner’s manual for specific requirements of your individual
phone system.
To Redial the Last Telephone Number Dialed
• Press the Redial button.
To Dial a Number Stored in Speed Dial
1. Press the Speed Dial button.
2. Select location (0–9) of speed dial number.
In order for the speed dial function to work, a telephone number must be programmed
into speed dial. See page 6.
To Customize Your AP IR Remote Control System
Follow the instructions beginning on page 5 to customize your AP IR Remote
Control System to fit your specific conferencing needs.
Conference Call Button
This button does not currently support any functions.
✍
Specifications
Warranty
ClearOne Communications, Inc. (Manufacturer) warrants that this product is free of defects in
both materials and workmanship. Should any part of this product be defective, the
Manufacturer agrees, at its option, to:
A. Repair or replace any defective part free of charge (except transportation charges) for a
period of one year from the date of installation for the end-user, provided the owner returns
the product to the Manufacturer at the address set forth below. No charge will be made for
parts or labor during this period;
B. Furnish replacement for any defective parts in the product for a period of one year from the
date of original purchase. Replacement parts shall be furnished without charge, except
labor and transportation.
This Warranty excludes assembled products not manufactured by the Manufacturer whether or
not they are incorporated in a Manufacturer product or sold under a Manufacturer part or
model number.
THIS WARRANTY IS VOID IF:
A. The product has been damaged by negligence, accident, act of God, or mishandling, or has
not been operated in accordance with the procedures described in the operating and techni-
cal instructions; or,
B. The product has been altered or repaired by other than the Manufacturer or an authorized
service representative of the Manufacturer; or,
C. Adaptations or accessories other than those manufactured or provided by the Manufacturer
have been made or attached to the product which, in the determination of the
Manufacturer, shall have affected the performance, safety or reliability of the
product; or,
D. The product’s original serial number has been modified or removed.