beautypg.com

No connector – ClearOne Converge USB User Manual

Page 9

background image

QUICK-START GUIDE

7

The terminal block pins are numbered from left to right 1, 2, 3, 4, 5 and 6.
The pins 1 and 3 are the inputs used to select different pairs of channels.
Channel selections are made by connecting combinations of pins 1 and
3 to pin 6. Pins 2, 4 and 5 must not be used to avoid equipment damage.
All E-bus signals will pass through the CONVERGE USB, but only the
selected Tx/Rx channels will be used by the CONVERGE USB.
The following illustration show the possible pin/channel selections using
jumper wires on the terminal block:

Tx channel - K

Rx channel - L

Tx channel - M

Rx channel - N

Tx channel - O

Rx channel - P

Tx channel - Q

Rx channel - R

No

Connector