ClearOne Converge USB - Manual (Page 3)

QUICK-START GUIDE
1
THE CONVERGE USB
The CONVERGE USB device provides plug-and-play USB audio In/Out
(transmit/receive) connectivity between popular desktop and laptop UC
applications or COLLABORATE Room and CONVERGE Pro for full, rich,
professional sound.
The CONVERGE USB also can serve as a E-bus (sometimes called
G-Link expansion bus) extender. The CONVERGE USB can, for example,
be up to 200 feet from the stack, then re-send the signal for up to
another 200 feet to the next E-bus component.
IMPORTANT: The CONVERGE USB only can be used with
CONVERGE Pro/SR systems operating at version 4.X or higher
software and firmware.
The latest version of the CONVERGE Pro firmware can be found on the
ClearOne website at:
http://www.clearone.com/resources#professional_audio
Parts Included
The CONVERGE USB interface kit (910-151-806) includes:
•
CONVERGE USB Interface unit (mounting screws NOT included)
• Terminal Block (6 position 3.81 mm block, Phoenix-type, for channel
selection)
• 6-foot USB A-B cable
• 25-foot CAT5E plenum cable for E-bus connection
• 12V DC @ 500 MA, 6W Power supply (wall adapter and cable)