ClearOne Converge USB - Manual (Page 12)

CONVERGE USB INTERFACE
10
ROUTING THE CONVERGE USB CHANNELS
Complete the audio channel routing in the Matrix in CONVERGE Console.
In CONVERGE Console, select any device in the site, then click on the
Matrix tab.
As selected by the terminal block, route the signals that will be in Inputs
and Outputs for the USB device connected through the CONVERGE
USB.
For example: if a terminal block jumper is between pins 1 and 6, then the
CONVERGE Pro channels are M for transmit and N for receive. These
can then be routed to the desired inputs and outputs.
The following two screen captures show audio from the CONVERGE
USB on Channel M going to Output 8, and Channel N receiving audio
from Input 9 then sending it to the CONVERGE USB.