Upgrading from converge pro 1.x firmware, Pgrading, From – ClearOne Converge USB User Manual
Page 17: Converge p, Firmware, Quick-start guide 15
QUICK-START GUIDE
15
5.
Units are fully upgraded.
6.
Verify units have been upgraded by checking the firmware version on the
front pane
l.
Reconnect all E-bus cables, if needed, to complete the stack of units.
Upgrading from CONVERGE Pro 1.X firmware
1.
Remove any 2.X, 3.X and 4.X units from the stack by disconnecting the
expansion bus link cable from the 1.X units.
2.
Re-connect to the 1.X stack with CONVERGE Console.
3.
Download the 4.X firmware file to the stack of units.
4.
The units will default and reboot after the download of 4.X firmware. The 1.X
to 4.X upgrade requires the firmware to be loaded twice to complete the
version upgrade.
5.
Reconnect to the stack with CONVERGE Console. Download 4.X a second
time to the units. The units will reboot.
6.
Units are fully upgraded.
7.
Verify units have been upgraded by checking the firmware version on the
front panel.
Reconnect all E-bus cables, if needed, to complete the stack of units.