ClearOne VIEW Pro - E120 Manual - Manual (Page 8)

4 t
EChnICal
s
uPPort
: 800.283.5936
Installation
PHYSICAL CHARACTERISTICS
D
IMEnsIons
(E
xCluDIng
C
onnECtors
)
Width: 12.2 inches (310mm)
Length: 7.4 inches (188mm)
Height: 1.75 inch (44.4mm)
MOUNTING THE E120
The VIEW Pro encoder includes a Rack Mount Kit (910-0002-001) with rack-mount ears that attach
to the encoder to facilitate mounting in a standard rack.
When mounted, the I/O connections are accessible from the back of the unit. (If needed, the unit
can also mount with the I/O connections facing the front of the rack.) Surface Mounting
Rack Mounting
The VIEW Pro encoder can also be surface mounted using the optional Wall Mount Kit (910-0002-
002) with surface-mount ears that attach to the encoder to facilitate mounting.
An optional VESA mount bracket Kit (910-0002-006) is available for applications where an encoder
must be located on a VESA mount.
VESA Bracket
Wall Bracket
(Mount to stud or
other solid surface)
Unit with VESA Bracket
hangs on Wall Bracket
Surface Mounting
Rack Mounting