ClearOne VIEW Pro - E120 Manual - Manual (Page 35)

I
nstallatIon
M
anual
31
VIEW Pro Accessory Kits
KIT DESCRIPTIONS
The following accessory kits are available to meet the mounting and control needs of your VIEW
Pro Encoders and Decoders:
Part Number Kit Name Description
910-0002-001 VIEW Pro Rack
Mount
(Included with
Encoder) Rack Mount Kit for VIEW Pro Encoder E120, Decoder D110
• 2X - Rack Ear, Extended length
• 6X - Screw, M3 x 6mm, Pan-head, Philips, Thread Locking,
Black
910-0002-002 VIEW Pro Wall
Mount
(Included with
Decoder) Wall Mount Kit for VIEW Pro Encoder E120, Decoder D110
• Bracket 1Ru Rack/Wall Mount
• 2X - Screw, M3 x 6mm, Pan-head, Phillips, Thread Locking,
Black
• 2X - Bracket, 19V PSU Wall mount
910-0002-003 VIEW Pro Cable
Raceway
(Optional) Cable Raceway Kit (12 inch) for Wall Mount Kit for VIEW Pro
Decoder D110
• 1X - Extrusion, Cable Raceway Cover, 12 inch
• 2X - Bracket, Cable Raceway Wall-mount Clip
• 2X - Cable Tie (4 inch)
• 2X - Spring Pin, 5-64 inch x 1 inch
• 2X - Plastic, Edge Protector, 3 inch
910-0002-004 VIEW Pro IR
Receiver
(Optional) IR Receiver cable for VIEW Pro Encoder E120, Decoder D110
• 1X - IR Receiver Assembly with 6 ft. cable
910-0002-005 VIEW Pro IR
Receiver &
Emitter
(Optional) IR Receiver Cable, IR Emitter Cable Kit for VIEW Pro Encoder
E120, Decoder D110
• 1X - IR Receiver with 6 ft. cable, 3.5 mm plug
• 1X - IR Emitter with 6 ft. cable, 3.5 mm plug
910-0002-006 VIEW Pro VESA
bracket
(Optional) Wall Mount VESA Bracket Kit for VIEW Pro Encoder E120,
Decoder D110
• 1X - Bracket, VESA and Hanging Mount
• 1X - Bracket, Wall Side Mount
• 2X - Bracket, 19V PSU Wall mount
• 4X - Screw, M4 X 6mm, Pan-Head, Phillips, Plain