Modifying the one-way driver file – ClearOne VIEW Pro - E120 Manual User Manual
Page 28
24
t
EChnICal
s
uPPort
: 800.283.5936
Once the device is added select the Sources tab for the Encoder/Decoder.
Change the Driver file from IR to your newly created driver. For this example, we would change the
driver file from IR to DVDTemplate.lua.
Now Apply your changes. The Encoder/Decoder is now configured to use your one-way Driver
file.
So far all you have applied is a renamed file. Now you need to modify the driver file to support your
source.
MODIFYING THE ONE-WAY DRIVER FILE
To modify a Driver Template you will need to use a text editor like Notepad. Notepad is included
in Windows XP and Vista. Next you’ll need the RS-232 Protocol for the source. This is normally
found on the manufacturer’s website. This document will tell you the communication settings, pin
connections, and the RS-232 commands.