LaMotte SMART 3 Electronic Soil Lab - Manual (Page 43)

SMART3 Soil 1.11 43
Press 4. ENTER . The screen will
display Storing... for about
1 second and the meter will
return to the Editing Menu.
Editing Menu
Set Clock
Logging
Factory Setup
Set PWR Save
12:00:00 001/500
SETTING THE BACKLIGHT TIME 
The backlight illuminates the display for enhanced viewing. The default setting is
10 seconds. If Button Control is chosen the backlight button on the key pad will
act as an on/off switch and the backlight will remain on or off when the meter is
being used. When one of the other settings – 10, 20 or 30 seconds – is chosen,
the display will be illuminated for the specified amount of time after any button is
pressed.
NOTE: The backlight feature uses a significant amount of power. The longer the
backlight is on, the more frequently the battery will have to be charged if the
USB/Wall Adapter is not being used.
From the 1. Editing Menu, press
or to scroll to
Backlight Time.
Editing Menu
Logging
Factory Setup
Set PWR Save
Set Backlight Time
12:00:00 001/500
Press 2. ENTER to select Set
Backlight Time.
Backlight Time
Button Control
10 seconds
20 seconds
30 seconds
12:00:00 001/500
Editing/Set Up