OSRAM SYLVANIA Chain X2 LED - Manual (Page 2)

2
2.2 Peel plastic tape backing to expose double sided tape and place modules in desired
location.
2.3 Secure the modules through the mounting hole using screws or rivets.
Do not overtighten.
3.0 Electrical Installation
3.1 Use wire nuts to connect the red striped (+) input wire of the modules to the red (+) output
wire of the 12V power supply.
Connect the black striped (-) input wire of the modules to the blk (-) output wire of the 12V
power supply.
3.2 Cap off any unused connection wires when finished.