OSRAM SYLVANIA BackLED Plus - Manual (Page 2)

2
2.0 Mechanical Installation
2.1 Measure the appropriate amount of product for the length of the application and cut.
Cuts can be made between any two modules.
2.2 Peel plastic tape backing to expose double sided tape and place modules in desired
location.
2.3 Secure the modules through the mounting hole using screws or rivets.
Do not overtighten.
3.0 Electrical Installation
3.1 Use wire nuts to connect the red striped (+) input wire of the modules to the
red (+) output wire of the 12V power supply.
Connect the black striped (-) input wire of the modules to the blk (-) output
wire of the 12V power supply.
BackLED L
PLUS
BackLED M
PLUS