Canon BJC-6200 - Manual (Page 96)

96 Using the Scanner
Scanning an Image
4
Load the image you wish to scan in the auto sheet feeder of the printer.
➀ Place the image in the scanning holder.
➁ Insert the scanning holder in the auto sheet feeder of the printer.
• The maximum thickness of the original must be within 0.45mm, including
the scanning holder. (The scanning holder is 0.2mm thick so the image
you wish to scan must be up to 0.25mm thick.)
• To prevent possible damage to the printer or Scanner Cartridge, do not
scan the image with paper clips or staples attached.
• To prevent possible damage to the scanning holder, always insert the
scanning holder into the auto sheet feeder with its top, seamed edge
down.
➀
➁
Important