0 introduction – Viking Pump TSM275: AL-05 User Manual
Page 7
Page 7
2.0 Introduction
2.1
General
Acculobe rotary lobe pump is manufactured by Johnson Pump (UK) Ltd. a subsidiary
of Viking Pump Inc., Cedar Falls, USA, (a unit of the IDEX Corporation) herein after
referred to as ‘JPUK’.
This manual includes all the necessary information for the Acculobe pump and
should be read prior to commencing installation, operation or maintenance.
When asking for assistance please quote the pump model and serial number. This
information can be obtained from the pump nameplate, which is located on the top of
the pump gearbox body.
If it is proposed to modify the system or change the characteristics of the product to
be pumped from that for which the pump was originally selected, Johnson Pump
(UK) or their authorised distributor should be consulted.
2.2
Johnson Pump (UK) Ltd Distributors
Johnson Pump (UK) distributes their products internationally via a network of
authorised distributors. Throughout this manual where reference is made to Johnson
Pump (UK), any authorised distributor will also provide service and assistance.
Should you require any additional information regarding the Acculobe pump contact
Johnson Pump (UK) or their local authorised distributor.
2.3
Receipt and Storage
On receipt of the pump, immediately examine for any signs of visible damage. If any
damage is noted, contact Johnson Pump (UK) and clearly mark upon the carriers’
paperwork that the goods have been received in a damaged condition, with brief
description of damage.
If the pump is not required for immediate installation then it should be stored within a
suitable environment.
2.4
Cleaning.
The product seals are mounted directly behind the rotors and are designed
and positioned to minimize product entrapment and maximize the effects of
cleaning.
It is recommended that the exterior of the pump is cleaned periodically.